TMP2/AA MOUNTING BRACKET
Aluminium alloy mounting bracket for TMP2/AA model heat detectors.
Dimensions 125x18mm, fixing holes wheelbase 108mm.
Stainless steel avalable
TMP2-Connectivity Kit
Connecting device and USB/RS485 connection cable between PC and TMP2 heat detectors to use TMP2-Configurator software
Ti potrebbe interessare…
ATEX CABLE GLAND FOR TMP2
1/2″ NPT ATEX cable holder for TMP2 heat detectors. Available for armoured and non armoured cables.
NOTE: TMP2 4-20mA model uses 3/4″ NPT cable holders.
Ti potrebbe interessare…
TMP2 MOUNTING BRACKET
Aluminium alloy mounting bracket for TMP2 Atex model heat detectors. Dimensions 105x18mm, fixing holes wheelbase 87mm. Stainless steel avalable.
Ti potrebbe interessare…
TMP2_Configurator
Software for TMP2 configuration, maintenance and data managing event Log for TMP2 heat detectors.
Complete with connecting device and USB/RS485 connection cable (TMP2 Connectivity Kit).
Ti potrebbe interessare…
TMP2-P
TMP2 heat detectos probe without housing- Spare part for TMP2 heat detectors. Can be used also as stand alone (not certified).
Stainless steel available.
Ti potrebbe interessare…
TMP2 (4-20mA output)
ATEX II 2 G Ex d IIC T6 heat detector with proportional 4-20mA output, range -10° +100°C (-10°=4mA +100°=20mA).
Aluminium alloy housing IP65, chrome plated brass probe (stainless steel available). One 3/4″ NPT way connection opposite to the probe side.
Ti potrebbe interessare…
TMP2 JO and TO (Atex Zone 1 + EN54-5)
ATEX zone 1 certified II 2G Ex d IIC T6 and EN54-5 certified for temperatures A2 (54° to 70°C) and C (84° to 100°C) heat detector.
Rate of Rise and/or static alarm. LED status: OFF in normal condition, ON in alarm. Or PULSE in normal condition, OFF in Fault condition, ON in alarm condition. Automatic or manual Reset. IP65 aluminiun alloy housing with window and chrome plated brass probe (stainless steel available).
One 1/2″ NPT way connection opposite to the probe side (JO model) or two 1/2″ NPT way connections on the two sides (TO model) .
Ti potrebbe interessare…
TMP2 J and T (Atex Zone 1)
ATEX zone 1 certified II 2G Ex d IIC T6 heat detector, with rate of Rise and/or static alarm. Internal status LED. Automatic or manual Reset. IP65 aluminiun alloy housing and chrome plated brass probe (stainless steel available) with one 1/2″ NPT way connection opposite to the probe side (J model) or two 1/2″ NPT way connections on the two sides (T model).
Ti potrebbe interessare…
TMP2 DUST (EN54-5)
Aluminium housing IP66 heat detector. Static and/or Rate of Rise alarm temperature. LED status: OFF in normal condition, ON in alarm, or PULSE in normal condition, OFF in Fault condition, ON in alarm condition. Manual or automatic reset. EN54-5-CPR certified for temperatures classes A2 (54 to 70°C) and C (84 to 100°C)