TT-PTB
Portable Tester to chek operativity of sensing cables
Portable Tester to chek operativity of sensing cables
TraceTek TT-7000-HUV sensor cable detects leaks and spills of sulfuric and nitric acid at any point along its length.
Insensitive to water and dirt and sunlight.
TT7000-HUV is designed for demanding environments.
Not resettable it has to be replaced after contamination.
TraceTek TT-5001 sensing cable detects liquid organic solvents anywhere along its length, but does not react to the presence of water.
With a fluoropolymer overbraid the cable is resistant also in critical environments.
The cable is not resettable, after contamination must be replaced.
Available versions:
TT-5001 for floor installation
TT-5001-HUV with special braid UV resistant for outdoor installation
TT-5001-HS with special braid for underground installation (in conduit)
TraceTek Fast Fuel Sensor is a fast acting probe designed to detect hydrocarbon fuel floating on water, spreading on a flat surface or collected in a sump. The probe ignores water. TT-FFS is resettable and can be reused only after following carefully the cleaning procedure.
TraceTek TT5000 sensing cable detects the presence of liquid hydrocarbon fuels at any point along its length, yet it does not react to the presence of water. Installed with an alarm and locating module, the cable senses the liquid and pinpoints the location of the leak within one meter.
The cable is not resettable, after the contact with the hydrocarbons it has to be replaced.
Available versions:
TT-5000 for floor installation
TT-5000-HUV with special braid UV resistant for outdoor installation.
TT-5000-HS with special braid for underground installation (in conduit).
TraceTek TT3000 sensing cable detects the presence of conductive liquids, most acid and bases, and also deionized water at any point along its length.
TT-3000 is rugged and can be reused even in corrosive environments. The cable is resettable.
TraceTek TT1100 sensing cable detects the presence of water at any point along its length.
Covered by an absorptive synthetic fiber braid, it is suitable for installation on pipes.
TT-1100 resets when dry.
TraceTek TT1000 sensing cable detects the presence of water at any point along its length.
Suitable for installation on the floor, under floating floors, laid in ducts.
TT-1000 resets when dry.